The Clean Burn Model CB-1750 produces approximately 175,000 BTU/hr. and is the smallest of the low profile designs, making it ideal for numerous applications and convenient installations. As a broad guideline, the Model CB-1750 is suitable for facilities generating smaller quantities of waste oil annually


 Engineered from the ground up to burn waste oils

Patented heat exchanger generates more heat

Unique non-welded flue tubes for longer service life

Advanced burner preheats oil to optimize combustion

Swing-away burner and door make service easy

Longest cleaning interval of all units in its class

Lower stack temperatures, higher heat output

Automatic flow control means no fuel adjustment required

Ideal for unit heating or with a Clean Burn Recycling Center

Unequaled service and support from Clean Burn Distributors

Model CB-1750 Specs.
*Maximum BTU/hour 175,000 (51.25 kW)
*Maximum oil consumption 1.2 GPH (4.54 L/h)
Fuels Used oils: Crankcase,ATF, hydraulic
Fuel oils: #2, #4, and #5 fuel oil
Air flow output (CFM) Unit heater 1700
Central furnace (ducted)
0.25 SPWC (in.) 1500
0.30 SPWC (in.) 1400
*Air compressor required 2.0 CFM @ 25 PSI
(3.4 m3/h @ 1.7 bar)
Stack Size 8 inch dia.(20cm dia.)
Furnace Dimensions, Assembled 83.25” L x 29.25 W x 31.5 H
(219cm x 74cm x 79cm)
Approx. Weight (uncrated) 406 pounds (182.7 kg)
Electrical Requirements 115 VAC 60 Hz, single phase
30 A circuit breaker

*Values indicated above are nominal. Actual values will vary depending on fuel and installation.


CB-1750 User Manual

CB-1750 Bid Specs

Contact Us

For general questions, comments, or requests, please fill out the form. For parts/service, please call (410) 970-9083

Not readable? Change text. captcha txt