CB-140

CB-140

The Clean Burn Model CB-140 is the smallest and most economical Clean Burn used-oil furnace in terms of initial cost. It produces approximately 140,000 BTU/hr. and is ideal for small garages, shops, and workspaces.

MODEL INFORMATION

FEATURES
 Engineered from the ground up to burn waste oils

Patented heat exchanger generates more heat

Unique non-welded flue tubes for longer service life

Advanced burner preheats oil to optimize combustion

Swing-away burner and door make service easy

Longest cleaning interval of all units in its class

Lower stack temperatures, higher heat output

Automatic flow control means no fuel adjustment required

Ideal for unit heating or with a Clean Burn Recycling Center

Unequaled service and support from Clean Burn Distributors

SPECS
Model CB-140 Specs.
*Maximum BTU/hour 140,000 (41 kW)
*Maximum oil consumption 1.0 GPH (3.8 L/h)
Fuels Used oils: Crankcase,ATF, hydraulic
Fuel oils: #2, #4, and #5 fuel oil
Air flow output (CFM) Unit heater 2000
Axial fan
Furnace cannot be ducted
*Air compressor required 2.5 CFM @ 25 PSI
(4.25 m3/h @ 2 bar)
Stack Size 6 inch dia.(15cm dia.)
Furnace Dimensions, Assembled 61” L x 32 W x 32 H
(155cm x 81cm x 81cm)
Approx. Weight (uncrated) 220 pounds (99.8 kg)
Electrical Requirements 115 VAC 60 Hz, single phase
30 A circuit breaker

*Values indicated above are nominal. Actual values will vary depending on fuel and installation.

RESOURCES

CB-140 User Manual

CB-140 Bid Specs

Contact Us

For general questions, comments, or requests, please fill out the form. For parts/service, please call (410) 970-9083

Not readable? Change text. captcha txt